0154.062DR LITTELFUSE Fuse: Applications, Selection Guide, Alternatives and Buying Notes

0154.062DR LITTELFUSE fuse is a board-level circuit protection part from the OMNI-BLOK 154 family. It is specified as a 62 mA, 125 V AC / 125 V DC, fast blow fuse in a 2-SMD, square end block with holder package. The part is used to open a fault path before downstream traces, ICs, connectors or supply branches are damaged by abnormal current. View the 0154.062DR product detail page or contact In-Fortune for sourcing support.

What is 0154.062DR?

0154.062DR is a Littelfuse board-mount fuse, not a semiconductor switch or resettable PTC. Its job is simple but critical: conduct normal current with acceptable voltage drop, then open the circuit when current and time exceed the fuse element's calibrated limits. That means the part must be selected from the real fault profile of the circuit, not only by the nominal load current printed on a power rail.

The OMNI-BLOK 154 family positioning matters. A surface mount fuse and holder assembly has a different mounting method, service behavior and thermal environment from a larger cartridge fuse, an automotive blade fuse or a resettable polymer device. Treat the suffix and package as part of the approved part number.

How 0154.062DR is used

Typical circuit placement

In a PCB design, 0154.062DR is usually placed in series with the branch it protects. Common locations include the input of a low-power module, the output of a small converter, a sensor or communication branch, a protected auxiliary rail, or a line that leaves the board through a connector. The fuse should be placed so the protected trace length is short and so fault current cannot bypass the protection point through another path.

For normal operation, the engineer checks the continuous current, startup or inrush pulse, ambient temperature, expected derating, voltage drop from cold resistance and the upstream source's available fault current. For a real fault, the fuse must open within the safety target while staying inside its rated voltage and breaking-capacity limits. The fuse also needs enough spacing, solder quality and thermal clearance so it behaves like the datasheet part rather than a heat-sunk or overheated variant.

Package and assembly checks

0154.062DR uses requires holder, surface mount mounting in a 2-SMD, square end block with holder package. That means the PCB footprint, solder process and mechanical keep-out are part of the electrical decision. A substitute with the same current rating but a different footprint can create an assembly defect, a repair problem or a different thermal trip profile.

Key specifications for 0154.062DR

0154.062DR selection guide

Select 0154.062DR when the design needs low-current secondary protection where a 62 mA fast-acting rating and replaceable Nano2-style holder assembly are required on the PCB. The 62 mA rating should sit above the verified continuous operating current with derating margin, but below the level where the protected load, connector or PCB trace would be damaged. The fast blow behavior should match the load profile. A fast-blow fuse is often better for sensitive secondary circuits with limited inrush; a slow-blow fuse is often used where startup energy is expected and acceptable.

Do not select 0154.062DR for circuits that need ampere-level load current, a non-replaceable axial fuse, or a footprint already released for a bare 451-series SMD fuse. If a fuse opens during normal startup, the answer is not simply to raise the current rating. First check inrush waveform, ambient temperature, hold time, upstream supply current limit and whether a time-delay family is more appropriate. If the circuit has a regulated safety requirement, compare the approval agency list and customer qualification file before freezing the BOM.

For released products, the safest selection check is to compare the actual schematic node, PCB footprint, load waveform and qualified supplier list against the complete manufacturer part number. A shorter model string or an omitted suffix can point to a package variant that looks close in search results but is not approved for the board.

Alternatives and cross references for 0154.062DR

0154.062DR alternatives should be reviewed as engineering candidates. Before approving a replacement, compare the datasheet, response curve, current rating, voltage rating, breaking capacity, melting I2t, cold resistance, package outline, PCB footprint, mounting process, operating temperature, approval agencies, lifecycle and customer compliance requirements.

When the alternative is another Littelfuse suffix, the main risk is often package, packaging format, termination finish or agency coverage. When the alternative is from another fuse family, the risk expands to time-current behavior, thermal coupling, board layout and qualification evidence. Contact In-Fortune to confirm 0154.062DR specifications before changing a released BOM.

Buying notes and sourcing checks

Before sending an RFQ for 0154.062DR, confirm the complete manufacturer part number, LITTELFUSE brand, canonical suffix spelling, package style, reel or cut format, date-code requirement, batch consistency, original factory condition, compliance documentation and acceptable substitute range. For production support, include the circuit role, operating current, maximum fault source, approval requirements and whether engineering can accept a suffix or family change.

Do not approve a substitute only because the current rating is close. Check whether the design needs fast-blow or slow-blow behavior, whether the package matches the PCB, whether the fuse holder or axial lead geometry is unchanged, and whether agency approvals satisfy the end equipment. 0154.062DR product detail page. Request sourcing support for 0154.062DR. Send an RFQ with your required quantity and delivery schedule.

0154.062DR LITTELFUSE FAQ

Where can I find the 0154.062DR datasheet?

Use the Littelfuse OMNI-BLOK 154 datasheet or product page as the primary reference, then confirm the exact suffix and packaging documentation with the supplier.

What is the 0154.062DR pinout?

A fuse does not have an IC-style pinout. For 0154.062DR, the practical pinout check is package orientation, solder pad or axial lead geometry, current path, holder interface if present, and PCB land pattern.

What applications fit 0154.062DR?

0154.062DR fits board-level overcurrent protection where the circuit needs 62 mA, 125 V AC / 125 V DC, Fast Blow behavior and the 2-SMD, square end block with holder package style.

Can 0154.062DR replace a fuse with the same current rating?

Only after checking response time, voltage rating, breaking capacity, I2t, resistance, package, approvals, thermal layout and lifecycle. Same current rating alone is not enough.

Can a fast-blow fuse replace a slow-blow fuse?

Usually not without a circuit review. Fast-blow and slow-blow fuses handle inrush and overload timing differently, so replacement can cause nuisance opening or delayed protection.

What should procurement confirm before sourcing 0154.062DR?

Confirm the complete manufacturer number, LITTELFUSE brand, suffix, package or reel format, date-code expectation, batch consistency, original condition, compliance documents, lead time and approved substitute range.

Suggested internal links for 0154.062DR

• 0154.062DR product detail page
• In-Fortune exact model search for 0154.062DR
• LITTELFUSE manufacturer page on In-Fortune
• In-Fortune circuit protection product catalogue
• 0154001DR product detail page
• 0451005.MR product detail page

Missing or uncertain data for 0154.062DR

• Latest Littelfuse PCN, lifecycle and suffix availability: to be confirmed with supplier.
• Released PCB land pattern, holder orientation, axial lead forming or solder process: to be confirmed against the final drawing.
• End-product approval packet, RoHS, REACH and customer-specific compliance records: to be confirmed with supplier.
• Approved substitute list and whether response-time changes are acceptable: to be confirmed by engineering before procurement substitution.